Mackie Onyx Blackbird Manuel du propriétaire télécharger pdf (Page 24)

24 Onyx Blackbird

53. FADER LEVEL

For more precise adjustments, double-click on the

white fader level display below the fader and type in

these numeric adjustments manually (e.g. –3, then

Enter).

If you elect not to type in adjustments and move the

fadersmanually,thisdisplaywillstillreecttheposition

of the fader in dB of gain applied/reduced. Input fader

levels are post-input metering.

54. SOLO

This may be used to listen to an input signal (or

combination of input signals) without the interference

of other active inputs.

When a channel is soloed, this button turns yellow.

Solos are post-fader, post-input level, and post-mute;

post-mute meaning you will not hear a soloed input

signal if that input signal is also muted.

55. LINK

Odd and even-numbered pairs of channels may also

be stereo-linked for ease of control over stereo source

signals. When channels are linked, they share a single

mute [49], solo [54] and fader [51], that control the

output of the channel pair. Input meters [52] and peak

levels [50] are still viewed independently from either

side of the stereo pair.

The pans [48] are mirrored, meaning that if one

channel is panned left, its linked stereo pair will pan

right by the same increment.

Output Master Section Features

Since Blackbird features an 18x16 matrix mixer, each

output tab (stereo pair) features its own master section

when forward, comprised of the following features:

56. NAME

At the top of each master section are two names, one

customizable and one ﬁxed. To customize phones 1, for

example, ﬁrst select that output tab. Next, double-click

the green text at the top of the master section to edit it.

The output tab also conveniently stores this information

for easy reference throughout the session.

All master tabs retain their original, ﬁxed names in

addition to any updates. This way, both associations

with the output are available and it will be difﬁcult to

lose track of which output tab is feeding which artist

and/or physical output.

57. CLEAR PEAKS

If there is a clip indicated anywhere on the matrix

mixer and all necessary gain adjustments have been

made to compensate for them, select clear peaks to

remove all previous peak indicators from ALL mixer

tabs.

When a peak has occurred on another mixer (e.g. one

that is not presently being viewed), the clear peaks text

will turn yellow to indicate that a peak has occurred.

Feel free to make any necessary gain adjustments and

select the clear peaks tab once again.

58. MUTE MIX

This button allows you to mute output from the active

mixer tab, and in turn from its corresponding hardware

output on Blackbird.

It is possible to mute or un-mute mixes from

the output tabs, as well, without making those

mixers active.

When mute is engaged, this button (and its

corresponding button in the output tab) will turn red.

Mute mix is pre-fader and pre-output metering.

65 66 67 68

When channels are ﬁrst linked, the right

(even) channel slaves to the left (odd)

channel, and the fader levels [51] and pans

[48] of both inputs will automatically move to the

position dictated by the level and pan of the left (odd)

channel.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 33 34

Commentaires sur ces manuels

Pas de commentaire

Mackie Onyx Blackbird Manuel du propriétaire Page 24

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel d'enregistrement Mackie Onyx Blackbird