Mackie Spike Guide de l'utilisateur télécharger pdf (Page 27)

User’s

Guide

USB: The signal from Tracktion arrives via USB, and is sent directly to your

monitors, headphones, and SPDIF output. If the MIX knob is set to USB,

you will only hear the output from Tracktion (or other audio software).

Note: For details of using the MIX knob, please see page 59.

MONITOR knob

This adjusts the level of the rear panel Monitor analog outputs. It does not af-

fect the headphone or S/PDIF output levels. Use this wisely to gently increase

or decrease the levels going to your active monitors or ampliﬁ er/passive-moni-

tor combo.

Note: Keep this knob turned down each time you turn on your sys-

tem, and then increase it to a safe listening volume.

PHONES knob and

HEADPHONE jack

Note: Make sure the PHONES knob is turned fully down before plug-

ging in your stereo headphones. This will protect your hearing and

prevent any loud surprises.

The headphone signals are the same as the Monitor output signals, except the

level is controlled by the PHONES knob, not the MONITOR knob. (The Moni-

tor outputs and the headphones output are both affected by the MIX knob.)

The headphone jack accepts 1/4" TRS stereo plugs. If your headphones have

a 1/8" mini-plug, you will need a 1/8" to 1/4" stereo adaptor, commonly sold in

electronics and audio stores.

MIN MAX

PHONES

MIN MAX

MONITOR

MIN MAX

GAIN 2

MIN MAX

GAIN 1

DIR USB

MIX

-30 0

48V

-30 0

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 76 77

Pas de commentaire

Mackie Spike Guide de l'utilisateur Page 27