Mackie TT24 Manuel du propriétaire télécharger pdf (Page 25)

Owner’s Manual

5.2.2 Six-Band EQ

The Master outputs can each access a six-band EQ

comprised of a four-band EQ and two kill ﬁlters (see

page 38) and a 31-band graphic EQ (see page 39).

EQ Linking

The Master LR and C/Mono is actually three EQs: LR

is stereo linked (two EQs) while the Mono EQ (one EQ)

can also be linked with LR. To link, hold down the LR

and C/Mono channel SELECT buttons for two seconds

(see Channel Linking on page 13).

When the Master LR or C/Mono fader’s SELECT but-

ton is pressed with the EQ or OVERVIEW Touchscreen

displayed, the EQ (and compressor) displayed on the

Touchscreen is LR. If the LR and C/Mono are linked,

changing the LR EQ also affects the Mono EQ. If they

are not linked, the C/Mono EQ is independent.

5.2.3 Compressor

The Master compressor operates identically to the

channel compressor (see page 40).

The Master LR and C/Mono compressor is actually

three compressors: the LR compressors are stereo

linked while the C/Mono compressor can be linked, if

desired.

The Master compressor can be viewed from the

Master OVERVIEW Touchscreen and adjusted on the

COMPRESSOR Touchscreen.

5.2.4 Fader Position in Signal Path

The Master LR or LCR fader position is adjustable

from post- to pre-compressor. In the pre-compressor

position, the user can ride the master fader while main-

taining the output level protection of the compressor.

The master fader position can be adjusted from the

Master OVERVIEW Touchscreen.

5.3 Aux Send

Each Aux Send has the following signal path: six-band

parametric EQ, and compressor. The position of the EQ

and compressor can be reversed.

5.3.1 Six-Band Parametric EQ

The Master Aux Send EQs operate identically to the

Master LR and C/Mono EQs (see page 39).

If a pair of Aux sends is linked, their EQs are also

linked: adjusting the EQ of one aux of a linked pair

adjusts the other’s EQ.

The Aux Send EQ can be viewed from the AUX

MASTER and Aux OVERVIEW Touchscreens. The EQ is

adjusted from the 6 BAND EQ Touchscreen.

5.3.2 Compressor

The Master Aux Send compressors operate identically

to the channel compressors.

If a pair of Aux sends is linked, their compressors are

also linked: adjusting one aux’s compressor parameters

also adjusts those of the other aux.

The compressor for the selected Aux Send Master is

displayed from the AUX MASTER and the Aux OVER-

VIEW Touchscreens. Its settings are adjusted on the

Aux Master COMPRESSOR Touchscreen.

5.4 Flex-Group DSP

There are a total of eight DSP blocks available for the

Flex-Groups so each of the eight groups can use a block

of DSP except VCA types (see page 26). Not all groups

can use DSP at once if they are in multichannel group

mode. The Group DSP contains a four-band EQ and

compressor. The default order is EQ into the compressor

but they can be reversed.

5.4.1 Flex-Group Modes

Each group can be congured as mono, stereo, LCR (if

in LCR Mode), or VCA. The group type is set by a toggle

button in the Group OVERVIEW Touchscreen. Each

group’s mode can be congured independently.

Mono Mode

If the TT24 is in L/R+Mono mode, all groups are mono

by default. Mono groups operate similarly to groups on a

typical analog console: pre-pan mono signals are routed

from the channels to the Groups using the GROUP AS-

SIGN switches. After group processing, the signal passes

through the group MUTE switch, fader, and can then be

routed to the Mono or LR Master outputs. A group pan is

available for L/R positioning. Group signals are available

to the Matrix (if enabled).

Stereo Mode

Stereo groups do not have a pan control. Signals

are routed from channels to stereo groups using the

GROUP ASSIGN switches but the signal is post-pan and

the stereo image is maintained throughout the group

signal path. After any group processing, the stereo group

signal can be routed to the main L/R output after the

Group’s MUTE switch and fader. Stereo groups can also

be routed to the C/Mono output but the stereo signal is

summed to mono.

LCR Mode

In LCR mode, the same three group modes are avail-

able along with LCR group mode, but they operate

slightly differently. A mono group still receives its mono

signal from the assigned channel, and can be routed to

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 67 68

Commentaires sur ces manuels

Pas de commentaire

Mackie TT24 Manuel du propriétaire Page 25

Commentaires sur ces manuels

Produits connexes et manuels pour Contrôleurs de DJ Mackie TT24